Precisa 360 - Entering the S-Correction Factors (Graphic Version Only); Entering the S-Correction Factors (10-Key Version Only); Entering the S-Correction Factors (5-Key Version Only)

360 Adjustments
61
3.13.3 Entering the S-correction factors (graphic version only)
1. Ensure the balance has reached its operating temperature, is levelled and set to the service
mode according to chapter 3.8.
2. Switch the service menu by pressing MENU and call up "S-Correction".
3. Enter the S-correction factors with {A-}, {A+}, {B-} und {B+} and set them with {

 }. The
balance is still in service mode.
3.13.4 Entering the S-correction factors (10-Key version only)
1. Ensure the balance has reached its operating temperature, is levelled and set to the service
mode according to chapter 3.8.
2. Hold F until "SCORRECTION", followed by "SET SECTOR-A +0" appears.
3. Enter the S-correction factor Sa with C and D and set it with {SET} (press A).
4. Switch to sector b with {SECTOR} (press B). "SET SECTOR-B +0" appears.
5. Enter the S-correction factor Sb with C and D and set it with {SET} (press A).
6. Hold F until "BALANCING" appears. The balance is still in service mode.
3.13.5 Entering the S-correction factors (5-Key version only)
1. Ensure the balance has reached its operating temperature, is levelled and set to the service
mode according to chapter 3.8.
2. Hold MODE until "SCORRECTION", followed by "SET SECTOR-A +0" appears.
3. Enter the S-correction factor Sa
with {UP} (hold REF until "FKT-KEY 3" appears)
and {DOWN} (hold REF until "FKT-KEY 4" appears)
and set it with {SET} (hold REF until "FKT-KEY 1" appears).
4. Switch to sector b with {SECTOR} (hold REF until "FKT-KEY 2" appears). "SET SECTOR-B +0"
appears.
5. Enter the S-correction factor Sb
with {UP} (hold REF until "FKT-KEY 3" appears)
and {DOWN} (hold REF until "FKT-KEY 4" appears)
and set it with {SET} (hold REF until "FKT-KEY 1" appears).
6. Hold MODE until "BALANCING" appears. The balance is still in service mode.