Prema DMM 5017 - 3 Quick Start; Default Settings; Scanner (5017 SC)

3 Quick Start
_____________________________________________________________________________________________________________________________________
3-1
3 Quick Start
3.1 Default Settings
When the unit is turned on for the first time, the following settings are defaulted to:
•
Measurement Function Vdc
•
Measurement Range 300V
•
Measurement Time 1s
•
Front Input Connectors Active
•
Automatic Filter On (AVG 10)
•
Pt100 sensor for temperature measurement
• all other functions switched off
The power-on setting can be stored in the menu "Configure, Settings, Save" .
You can set the instrument to the factory settings with the menu "Configure, Settings,
Load Fact, Set".
3.2 Scanner (5017SC)
You can find the inputs of the scanner on the rear panel of the instrument. When de-
livered the front input connectors are active.
The connections to the scanner can be done with two 50-pole sub-D connectors or
two adaptercards 3110 (see chapters "Accessories" and "Technical Specifications").