9 Technical Specifications
_____________________________________________________________________________________________________________________________________
9-21
9.10 IEEE-488 Interface
OUTPUT INFORMATION measurement result, function, range, measurement
time, calculation result and other device settings.
INPUT INFORMATION function, range, measurement time, start command,
calibration set-point, math program and constants,
display text and other device settings.
ADDRESS ...................... selectable from 0 to 30, in the menu "Device,
Interface, IEEE488".
SERVICE REQUEST...... SRQ after each measurement value.
TERMINATOR EOI Line and Line Feed
KEYBOARD .................. can be de-activated over REN, can be activated
over GTL and over ESC/LOCAL key (lockable over
LLO)
COMPATIBILITY ........... IEEE-488.1 and IEEE-488.2
BUS CONNECTOR......... 24-pin as per IEEE-488
To Next Page
Loading...