Prema DMM 5017 - Channel Selection for 5017 SC

Channel Selection for 5017SC
_____________________________________________________________________________________________________________________________________
4-8
4.6 Channel Selection for 5017SC
The channels of the built-in measuring points scanner can be selected in two ways:
1st possibility
Keypress Display / Action
CHAN: 2
ND
+ MATH

ÇÈ
&KDQQHO
×
-
KEY
increases the channel number by one
Ø
-
KEY
decreases the channel number by one
MENU
-
OUT KEY
terminates the entry and switches on the desired channel
Table: Channel selection with cursor keys
2nd possibility
Keypress Display / Action
CHAN: 2 nd + MATH

ÇÈ
&KDQQHO
MENU
-
IN KEY

ÇÈ
&KDQQHO
permits numerical entry for the channel marked by the cursor, using the
numerical keys in the function field
×
-
KEY
Cursor to left (tens digit)
Ø
-
KEY
Cursor to right (units digit)
MENU
-
IN KEY
confirms the entry
MENU
-
OUT KEY
terminates the entry and switches on the desired channel
Table: Channel selection by direct numerical entry
Function, range and integration time are stored for every channel and remain valid
after channel switching.