94
MBOX® USER MANUAL
The benets of the various Drawmodes become more apparent when the holes cut into the stencil are used to affect
more than one layer. Creative compositional effects can be generated by using a movie with a transparency effect to cut
the stencil. In the rst two illustrations below, the left-hand image shows a movie playing on Layer 1, and on the right,
that same movie with the Key - Luma effect (056) turned on.
In the next two illustrations, Layer 1 is using Drawmode 5 and a movie is placed on Layer 2. The result is shown with
Layer 2 using Drawmode 6 on the left and then with Drawmode 8 on the right.
To Next Page
Loading...