115
MBOX® USER MANUAL
Remember that if incorrect keys or inappropriate values are entered, then it is likely that the entire effect or transition
will fail when used with Mbox. It is best to start by modifying values to a small extent and examine the result of those
changes. So, to change the transition around a bit, change the following properties:
+ inputAngle = 0.7854
+ inputColor = 0, 1, 0, 1
+ inputOpacity = 0.5
+ inputWidth = 500
+ UserVisibleName = Green Diagonal
Note: The UserVisibleName doesn’t have to be changed, but it is used when indexing content and making thumbnails,
so having a unique name can be helpful.
To Next Page
Loading...