PRG Mbox - Page 201

191
MBOX® USER MANUAL
Fixture Sub-Fixture Parameter Description
Output Master
(1 required, up to
32 total)
Base
Intensity Master intensity of output
Red Red subtractive & additive for output
Green Green subtractive & additive for output
Blue Blue subtractive & additive for output
Brightness Brightness for output
Contrast Contrast for output
FX
Effect Select 2D effect applied to the output
Modier A First modier
Modier B Second modier
Modier C Third modier
Modier D Fourth modier
Modier E Fifth modier
Camera
Enable Projec-
tion Camera
Enables/Disables DMX control of the 3D per-
spective camera for output
Position X Left/Right position of camera in 3D space
Position Y Down/Up position of camera in 3D space
Position Z
Forward/Backward position of camera in 3D
space
Lookat X Left/Right aiming point of camera in 3D space
Lookat Y Down/Up aiming point of camera in 3D space
Lookat Z
Forward/Backward aiming point of camera in
3D space
Field of View
Adjusts the camera lens between narrow and
wide
Roll Rotates the camera around the axis of its lens
Geometry
Output Position
X
Moves imagery within the output left/right
Output Position
Y
Moves imagery within the output down/up
Output Scale Scales imagery within the output
Output Rotation Scales imagery within the output
Mix Offset X
Moves the output’s mix left/right on the Global
Surface in 1px increments
Mix Offset Y
Moves the output’s mix down/up on the Glob-
al Surface in 1px increments
Parameter Descriptions: Mbox Designer continued...