PRG Mbox - Page 206

196
MBOX® USER MANUAL
Fixture Sub-Fixture Parameter Description
Output Master
(1 required, up to
8 total)
Base
Intensity Master intensity of output
Red Red subtractive & additive for output
Green Green subtractive & additive for output
Blue Blue subtractive & additive for output
Brightness Brightness for output
Contrast Contrast for output
FX
Effect Select 2D effect applied to the output
Modier A First modier
Modier B Second modier
Modier C Third modier
Modier D Fourth modier
Modier E Fifth modier
Geometry
Output Position
X
Moves imagery within the output left/right
Output Position
Y
Moves imagery within the output down/up
Output Scale Scales imagery within the output
Output Rotation Scales imagery within the output
Mix Offset X
Moves the output’s mix left/right on the Global
Surface in 1px increments
Mix Offset Y
Moves the output’s mix down/up on the Glob-
al Surface in 1px increments
Keystone
Curve Enables and elects keystone curve/mode
Gamma Gamma of edge blend area
Edge Top Position/depth of top edge blend area
Edge Right Position/depth of right edge blend area
Edge Bottom Position/depth of bottom edge blend area
Edge Left Position/depth of left edge blend area
Keystone 1x Left/right position of top-left corner
Keystone 1y Down/up position of top-left corner
Keystone 2x Left/right position of top-right corner
Keystone 2y Down/up position of top-right corner
Keystone 3x Left/right position of bottom-right corner
Keystone 3y Down/up position of bottom-right corner
Keystone 4x Left/right position of bottom-left corner
Keystone 4y Down/up position of bottom-left corner
Linearity X Adjusts center of keystone surface left/right
Linearity Y Adjusts center of keystone surface down/up
Parameter Descriptions: Mbox Studio continued...