PRG Mbox - Page 63

53
MBOX® USER MANUAL
- Log Audio Info: enables logging of information of audio les
- Log TC Info: enables logging of timecode format/rate discrepancies
- Unlimited LTC Hours: enables timecode input hour values above 23 hours
+ Patch
- DMX Prole: selects from available control proles
- DMX Master Count: sets number of output masters
- Layer Count: sets number of playback layers
- DMX Protocol: selects Art-Net or sACN as input control protocol
- DMX Universe: sets rst control input universe
+ Pixel Mapping
- PixMap Enable: enables all pixel mapping processing and output
- PixMap File Index: selects active pixel mapping le by index number
- PixMap Delay: sets inter-packet delay time for pixel mapping output
- PixMap Disable ArtPoll: disables ArtPoll to allow broadcast even in the presence of ArtPoll devices
+ Playback
- Image Sequence FPS: sets default playback rate for image sequences
- Log Movie Info: enables logging of information of video les
- Movie Bitrate: sets default movie bitrate for read buffer sizing
- Playout Points: sets default playout point times (from movie end) for playout play modes
- TC Default: sets the default timecode value for movies with no specic timecode assignment
- TC Reader v3.x 29.97ndf: enables 29.97ndf compensation (for use with TC Reader app only!)
+ Video Input
- Disable Decklink AutoSwitch: disables automatic format switching by supported Decklink devices
- Decklink reset on lost signal: forces reset of video input when Decklink device loses input signal
- Syphon Sources: provides controls for assigning Syphon input devices to specic content indices
- Video Input (1-8): provides controls for setup (device, format, etc.) of video input devices
Note: The Mbox Remote v4 application also has a Preferences tab that works in the same way as the Preferences tab in
the Mbox application.