Fig. 64: Menu settings
7.2.1 TOWER MANAGEMENT
In this menu the tower management can be configured.
Fig. 65: Menu tower management
The menu shows an overview of configured timers.
Force Power ON for
biocide cycle
Activate the relay when it need to inject
biocide event if it’s out of “normal” running
cycle of the tower, and keep it activated
during all biocide cycles.
Complete active bio‐
cide cycle before
Power OFF
If selected, when the operating timer arrive
to the end of the active timer, if a biocide
cycle is in process, the controller keep the
relay active until the end of the biocide
cycle.
Remote Control OFF
stop operating timer
If selected, when the tower management
remote control is remove during an oper‐
ating timer slot, the relay is disable event is
the timer cycle is not finish.
MTWTFSS Selection of the day(s) of the week timer
will be active. Type of “multiple” selection,
press desired days to select/deselect.
General Menu
58
To Next Page
Loading...
