Winter You have 8 timers (in white in
the “Winter” part) at your dis‐
posal.
These timers are valid
throughout the year (From Jan‐
uary to December).
Summer/
Winter
You have 16 timers at your dis‐
posal.
The 8 timers of the “Summer”
part will be active for the
months of May, June, July,
August and September (In grey
part).
The 8 timers of the “Winter” part
will be active for the months of
January, February, March, April,
October, November and
December (In white part).
7.2.3 BIOCIDE B TIMERS
In this menu timers for biocide dosing are defined. The option are
similar to the menu BIOCIDE A TIMERS. BIO-INHIB-DISP SET‐
TINGS BIO-INHIB-DISP SETTINGS menu will allow you to adjust
the settings of the parameters of the Biocides, inhibitor and disper‐
sant.
Fig. 67: Overview biocide, inhibitor and dispersant settings
Pre-bleed There are 2 possibilities for pre-bleed: The
duration or the percent of hysteresis. It
depends on the pre-bleed mode you have
chosen in the OUTPUT SETTINGS.
Possible adjustment from 0 to 1440 min.
Possible adjustment from 0 to 100 %.
Duration of the post
bleed action
Enter the duration of the post bleed action
value. Possible adjustment from 0 to 1440
min.
Biocide
General Menu
60
To Next Page
Loading...
