Fig. 73: Diagram increasing parameter
E04 Free clorine AI1 Parameter identification, includes informa‐
tion on parameter number (e. g. E04), type
(e. g. Free chlorine) and associated main
sensor input (e. g. AI1)
Setpoint Enter the setpoint value.
Hysteresis Enter the hysteresis value.
Mode Dosage mode selection, on this selection
button we find the selected mode informa‐
tion (e. g. Hysteresis).
Base load Enter the base load value.
This setting is only available if the unlock
option is enabled in the setting options.
The basic load leads to a permanent
dosing regardless of measured values.
This function is to be used with great care
to avoid overdosage.
Maximum time Enter the maximum dosage time value.
Start limit Enter the dosage power from which the
dosage time is counted. This setting is only
available if the unlock option is enabled in
the setting options.
Fig. 74: Diagram dosing needs parameter
7.2.5 TANK LEVEL
In this menu limits of the tank levels can be configured.
General Menu
64
To Next Page
Loading...
