PathMaster® Manual Rev. H 6/03
- 59 -
Dot
The Dot tool creates a dot at the specified location on the board image. Click the Dot button to select the
tool. The default dot on and off parameters for the selected valve are used for each dot.
Editing the commands
Objects taught on the board image may be modified once created. To modify or edit an object, click on the
object to select it. Once the object is selected, its points can be dragged to a new location. An Area object
can be resized by dragging its corners. The FastMask™ object can be resized in a similar manor. The 2D
Line object can be modified by selecting the object. Once the object is selected, right click the object to
reveal the edit menu (a popup menus will appear). Select Edit Path. The vertex points of the path will
appear as squares. These points may be dragged around to change the 2D Line. Points may be added or
deleted. Right click on a point and then left click on Delete to delete this point. Right click in between two
points and click Add Point to add a point. When finished editing the object, click background image
outside of the object to register your changes and update the object.
Password Protection
To prevent unauthorized or accidental changes to project files in PathMaster® and in the Dispensing
System, password protection can be added to the download and save functions in PathMaster®.
Download Password
To add password protection to the download function in PathMaster®, select the Setup -> Password -> Set
Download Password option from the main menu. If no password exists, you will be asked if you would
like to create one. If a previous password exists, you must enter it correctly to continue. Next enter the
new password, click OK. Then re-enter the password for verification and click OK. The PathMaster®
Download Project and Download Main functions are now password protected. When either download is
attempted, a password will be required to perform the download. If the password is entered incorrectly, the
download is aborted.
Save Password
To add password protection to the save function in PathMaster®, select the Setup -> Passwords -> Set Save
Password option from the main menu. If no password exists, you will be asked if you would like to create
one. If a previous password exists, you must enter it correctly to continue. Next enter the new password,
click OK. Then re-enter the password for verification and click OK. The PathMaster® save function is now
password protected. When a Save or Save As function is attempted, a password will be required to perform
the save. If the password is entered incorrectly, the save is aborted.
Changing Password
To change the save or download password, repeat the corresponding process listed above using the new
password in place of the old.
Resetting Password
To reset the save or download password, repeat the corresponding process listed above, but do enter a new
password in the new or confirm password fields.
To Next Page
Loading...