PVA PVA2000 - Page 74

PathMaster® Manual Rev. H 6/03
- iv -
Preface
Notice & Disclaimer
This manual applies to one of the following automated workcells produced by Precision Valve &
Automation, Inc.:
• PVA250™
• PVA550™
• PVA750™
• PVA1000™
• PVA2000™
• PVA200C™
• PVA3000™
All machines are referenced throughout the manual as the Dispensing System or Workcell. This manual
provides information and functionality descriptions covering all the common options and configurations for
a Dispensing System. The particular machine associated with this manual may not contain all items or may
have additions. If the manual refers to an option that was not purchased, ignore that section. If options
exist on the machine not mentioned in this manual, please consult the Optional Equipment section of the
Operating Guide for more information on these additions.
Revisions to This Manual
The following list describes the major revisions in this manual (Rev. H 6/03) as compared to previous
manuals:
• Rewrite for PathMaster
®
version 2.05, including subroutine information.
• Update for PathMaster® version 2.3. 6/23/03 TMB
Content of This Manual
Definitions. Definitions for commonly used terms.
Notices and Warning. Basic safety practices are reviewed.
Getting Started. Instructions on establishing communication with the Dispensing System and installing the
PathMaster
®
software.
Working with Materials. Overview on the basics of liquid dispensing.
Beginning Programming. Prerequisite information for using PathMaster
®
.
PathMaster® Overview. Basic description of features and tools of PathMaster® software.
Using PathMaster®. Detailed manual on using the PathMaster
®
software.
DMC Error Code. A list of error codes that may be encountered while using the Dispensing System.