Important:
Your organization may also have implemented a dial plan, which defines various dial prefixes to
determine the characteristics of a call. For example, you may be able to dial 8 before the
videoconference number for a lower bandwidth call, or 6 for an audio-only call. For more information
on the dial plan in your organization, contact your system administrator.
Procedure
1. Access the XT Series web interface, as described in Accessing XT Series Web Interface on
page 14.
2. Select the number to call from XT Series web interface (see Figure 26: Dialing from the web
interface on page 41):
Important:
To modify advanced calling options, such as the call rate, see Modifying the Default Call
Settings on page 41.
•
Dial a new number by selecting Make your call > Basic Options > Direct Call. Enter
the number and select Call.
•
Dial a number from the list of recent calls by selecting Make your call > Recent calls.
Choose the number and select Call.
•
Dial a contact in the phone book by selecting Make your call > Basic Options >
Contacts. Choose the contact and select Call.
User Guide for Scopia XT5000 Series Version 3.2 Starting a Videoconference | 40
To Next Page
Loading...
