Name Resolution
XGA 1024x768
SVGA 800x600
VGA 640x480
3. Select Apply.
4. Select the refresh frequency rate from the Screen refresh rate field. See Table
12: Resolution and refresh rates on page 66 for the supported resolution and refresh rates.
Table 12: Resolution and refresh rates
Name Resolution Digital Refresh Rate (Hz)
Analog Refresh Rate Frequency
(Hz)
1080p 1920x1080 60 60
SXGA 1280x1024 60,75 60, 75
HD+
(900p)
1600x900 60 N/A
WSGA 1440x900 60 60
UVGA 1280x960 60, 85 60, 85
WXGA 1280x768 /
1280x800
60 60
720p 1280x720 60 60
XGA 1024x768 60, 70, 75 60, 70, 75
SVGA 800x600 60, 72, 75 60, 72, 75
VGA 640x480 72, 75 72, 75
5. Select Apply.
Start Sharing Content Automatically
About this task
By default, your XT Series automatically starts presenting PC content on the monitors to others in the
same room when you connect a PC.
When local presentation mode is enabled, the XT Series:
•
Automatically starts presenting when you connect a PC to the DVI connector on the XT Codec
Unit, if there is no active call.
•
Does not automatically accept incoming calls.
•
When you have an incoming call, local presentation mode is suspended and you are asked how to
handle the call (accept/reject/do not disturb).
•
Video input switches to DVI and the audio settings associated to DVI are automatically used.
User Guide for Scopia XT5000 Series Version 3.2 During Your Videoconference | 66
To Next Page
Loading...
