Radwin WinLink 1000 - Error Detection and Alarms

Performance Monitoring
WinLink User and Installation Guide Version 1.750 6-120
4. Click the check box to open the file for saving.
5. Click the
button and in the Select File dialog box indicate in
which folder and under what name the alarm log file is to be
saved, and click OK.
Error Detection and Alarms
WinLink™ Error detection and Alarms detect compatibility problems,
fault conditions of the radio or user links, and subsequently initiates
alarms to alert the user.
Note:
To store the Event Log, first define the IP address, subnet mask,
default gateway and trap address of the management PC,
(see
Defining the Management Addresses, page 5-85 for details).
Alarms (traps) are displayed in the Event Log in the lower panel of the
Main Menu screen. The event log may be saved as a TXT file.
The event log includes the following fields:
• Sequential number (ID)
• Date and time stamp
• Message
• Trap source
• IP address of the ODU that initiated alarm.
Æ To view summary of saved alarms
• From the Tools menu, choose Active Alarm Summary.
The Active Alarms Summary window opens: