WinLink™ 1000 System Components
WinLink User and Installation Guide Version 1.750 2-23
WinLink™ 1000 Manager
The WinLink™ 1000 Manager is an SNMP based element and link
management application which manages a complete link via a single IP
address. It identifies the IP Address, Subnet Mask, and Trap
Destination for each Site and also monitors the Radio Interface – RSS
[dBm] and Ethernet Service – Rx Rate and Tx Rate. The Manager
software facilitates the Link installation and Link configuration between
the ODU units. The intuitive, easy-to-use Manager has a graphical MS-
Windows interface, and can be utilized locally and remotely.
WinLink 1000 Manager provides:
• Planning tools such as a
Link Budget calculator
for calculating
the expected performance of the WinLink wireless link and the
possible configurations for a specific link range.
• Installation Wizard
• On-line monitoring of air interface quality allowing the
administrator to monitor the service and status of each link.
• On-line monitoring of equipment alarms and QoS
• Local and remote loopback testing
• Configuration settings
• On-line user manual and help files
• Over-the-air software upgrades
The WinLink™ 1000 Manager can easily be integrated with any NMS system.
Figure
2-12: WinLink™ 1000 Manager screen
To Next Page
Loading...
Need help?
General
