Mounting the ODU
WinLink User and Installation Guide Version 1.750 3-36
Installing the Software
To install the WinLink management program:
1. Insert the CD-ROM into your CD-ROM drive.
The WinLink™ 1000 Installation screen appears:
2. Choose Install WinLink™ 1000 Manager and follow the on-screen
instructions of the installation wizard to complete setup of the
WinLink™ 1000 Management program in the desired location.
Any PC running the WinLink™ 1000 management application can be
used to configure WinLink™ 1000 units.
Mounting the ODU
The ODU is the transceiver element of the WinLink system. The ODU
can be mounted on a mast or a wall. In both installations, the supplied
mounting kit is used to secure the ODU. Appendix B: Mast and Wall
Installation
describes the mast/wall installation instructions.
A WinLink link operates in pairs of two ODUs with the same
configuration. Both ODUs must be installed, and the antennas aligned
for maximum throughput.
To Next Page
Loading...
