Configuring the Site
WinLink User and Installation Guide Version 1.750 5-83
Inventory View the hardware and software inventory.
Management Configure the IP address, Subnet Mask,
Default Gateway, and the Trap Destination.
Security Change the Community Values and the Link
Password
Date and Time Set the date and time of the server and of
the System.
Advanced Configure the Bridge, define the LAN
connection and set the external alarm
inputs.
Functions at the top of the dialog box:
Backup Save a backup.ini file with the current
configuration.
Restore Load the backup.ini file created by the
backup.
Installation Mode Return to Installation Mode for the entire
link.
Selecting the Mute check box before clicking
the Install Mode button mutes the Beeper.
Mute Mutes the alignment tone at startup.
Reactivate the beeper during alignment.
Æ To edit the Configuration Parameters:
1. Click Configuration from the main menu.
2. Select which site to configure.
The Configuration dialog box opens. (See
Figure
5-11
)
To Next Page
Loading...
