Radwin WinLink 1000 - LAN Port; LAN Port for Poe-8; Table 9-3: Fast Ethernetc; Table 9-4: Fast Ethernetc

Appendix A: Wiring Specifications
WinLink User and Installation Guide Version 1.750 132
Table 9-2: E1/T1 Connector Pinout
Pin Function
4,5 Receive (input)
1,2 Transmit
(output)
LAN Port
The LAN 10/100BaseT interface terminates in an 8-pin RJ-45
connector, wired in accordance to
Table 9-3 .
Table 9-3: Fast Ethernet Connector Pinout
Pin Signal Function
1 TD (+) Transmit Data
(positive)
2 TD (–) Transmit Data
(negative)
3 RD (+) Receive Data
(positive)
6 RD (–) Receive Data
(negative)
LAN Port for PoE-8
When connecting the PoE-8 LAN port cable directly to PC, a crossed
LAN cable, terminated with RJ-45 connectors on both ends must be
used, wired according to the following table:
Table 9-4: Fast Ethernet Connector Pinout
Pin Wire Color Function PC
1 wisted White/Green Ethernet (RxN) 3
2 pair Green Ethernet (RxT) 6
3 twisted White/Orange Ethernet (TxT) 1
6 pair Orange Ethernet (TxN) 2
4 twisted Blue NA 4
5 pair White/Blue NA 5
7 twisted White/Brown NA 7
8 pair Brown NA 8