Selecting the Service Parameters
WinLink User and Installation Guide Version 1.750 3-51
Selecting the Service Parameters
You define the type of service required, Ethernet Only or Ethernet with
TDM in the Services screen as shown below. Notice that the Distance
between the sites automatically appears in the Distance box (from
Version 1.600).
Note:
WinLink ACCESS versions are Ethernet Only.
Figure
3-15: Installation Wizard, Service dialog box
Æ To select the services and rates:
1. In the Services box, select a service:
• Ethernet Only
• Ethernet + E1/T1.
The available bandwidth depends on the number of E1/T1 ports
selected.
To Next Page
Loading...
