Appendix E: Hub Site Synchronization
WinLink User and Installation Guide Version 1.750 13-153
Figure
13-6: Hub Site Synchronization Settings dialog box
The Synchronization Status dialog box displays the current status of
each side of the link.
• Operation: Type of unit
Hub Sync Master (HSM)
Hub Sync Client – Disable Transmission (HSC-DT)
Hub Sync Client – Continue Transmission (HSC-CT)
Independent Unit
• Synchronization:
N/A- for Master or Independent Units
Synchronized – for Hub Site Clients
Not Synchronized – for Hub Site Clients
• External Pulses: The status of the pulses running through the HSS
cable. The Master generates such pulses. The severity of each of
these states is indicated by green, yellow or red text color. Possible
states are described in the following table:
To Next Page
Loading...
