Radwin WinLink 1000 - Configuring TDM Operation; Setting the Clock Configuration; Figure 5-7: Tdm Clock Dialog Box for Figure 5-8: Tdm Clock Dialog Box for

Link Configuration Wizard
WinLink User and Installation Guide Version 1.750 5-78
Configuring TDM Operation
Setting the Clock Configuration
The TDM clock feature is enabled for carrier class IDU-C in addition to
the hardware version 2 and greater IDU-E with TDM. A TDM dialog box
will appear where IDU supports the clocking configuration feature (see
Figure 5-7 and Figure 5-8 ).
A new master clock configuration option is available in the Link
Configuration Wizard. The automatic mode selects the clock from the
first trunk that is working in normal mode (or is configured to loop-
back maintenance). If a specific trunk is selected, this trunk shall be
used as the system master regardless of the trunks state. The current
master clock trunk is also displayed.
Figure
5-7: TDM clock dialog box for T1 IDU