Radwin WinLink 1000 - Figure 4-3: Login Screen with

Starting the WinLink Manager Software
WinLink User and Installation Guide Version 1.750 4-63
Figure 4-3: Login Screen with Community Options Visible
• If using the system for the first time, leave the default
community passwords, netman for read-write, and public for
read-only.
• If community values were previously defined, enter them
under Community in the Read-Only or Read-Write boxes.
• If you are a user with read-only permission, click the Read
Only Mode check box.
The WinLink™ 1000 Manager main screen is displayed (see
Figure
4-4).
Note:
With BRS systems the link must be activated at both sites when
installing for the first time. A red Inactive Link box appears in the
center of the Manager screen. Activation is performed later.