Starting the WinLink Manager Software
WinLink User and Installation Guide Version 1.750 4-61
Table
4-5: Default Settings
Parameter Default Value
ODU IP Address 10.0.0.120
Subnet Mask 255.0.0.0
Manager Login password Admin
SSID –
Link Password Wireless-bridge
Rate Adaptive
Services Ethernet
Ethernet Configuration Auto Detect
Radio Link Failure Actions No action
Bridge Non PoE systems: Hub Mode, Aging time = 300 sec
PoE systems: Bridge Mode
Community values Read-write – netman
Read-only – public
Starting the WinLink Manager Software
Æ To start the WinLink™ 1000 Manager:
1. Connect the management station to the LAN.
2. Double-click the WinLink™ 1000 Manager icon on the desktop, or
click Start > Programs > WinLink™ 1000 Manager.
The Login dialog box appears.
To Next Page
Loading...
