Managing Configuration Files
WinLink User and Installation Guide Version 1.750 5-98
Managing Configuration Files
Saving Configuration in a File
The management software allows you to save configuration
parameters of the local and remote units on the management station
as an INI file. Each site is saved in a separate INI file.
Æ To save the configuration in a file:
1. Click Configuration from the main menu.
2. Select which site to backup.
The configuration dialog box opens.
3. Click Backup.
4. In the Save As dialog box, indicate in which folder and under what
name configuration file is to be saved, and click Save.
Restoring a Configuration File
Configuration files (*.ini) can be uploaded from the management
station. Verified configuration files can be distributed to other units
that use the same configuration.
Æ To restore a configuration file:
1. From the Configuration menu, select the site to reconfigure.
The Configuration dialog box opens.
2. Click Restore.
3. From the Open dialog box select *.ini file to upload and click OK.
Resetting
Note:
Resetting the link causes service disconnection.
In order to maintain the link configuration, reset the remote site first
.
Æ To reset the unit:
1. From Maintenance, reset the remote unit.
2. From Maintenance, reset the local unit.
To Next Page
Loading...
