Technical Specifications
WinLink User and Installation Guide Version 1.750 2-26
NOTE
Before each installation you must use the Link Budget Calculator
(Appendix H: Link Budget Calculator) to locate the supported rates and
services
for your particular product.
Regulations
WinLink operation complies with the radio and environmental
regulations listed in the following tables:
Table
2-4: Radio Regulations
FCC 47CFR part 15 subparts B&C and E, part 27 and part 90
IC RSS-210
ETSI EN 300 328 and EN 301 893
UK VNS 2107
Australia AS/NZS 4771
India WPC
Table
2-5: Environmental Regulations
Safety EN 60950, IEC 60950, UL 60950, CAN-CSA C22.2 60950
EMC EN 300 386, EN 301 489, EN 55022, EN 61000, EN 55024,
AS/NZS CISPR 22, CAN/CSA-CEI/IEC CISPR 22-02, FCC
47CFR class B part 15 sub-part B
Environmental IEC 60721 class 4M5 IP67
Ethernet Services
The WinLink LAN port provides 10/100BaseT interfaces with auto-
negotiation and transparent VLAN support. Traffic handling is provided
by a MAC level self-learning bridge. Ethernet services include:
• 1 or 2 Ethernet interfaces in the indoor units
• 10/100BaseT with auto-negotiation (IEEE 802.3)
• Layer 2 Ethernet bridge
• Self-learning of up to 2047 MAC addresses (IEEE 802.1Q)
• Support of 1+1 applications (HUB/Bridge selectable mode)
• Up to 18 Mbps symmetrical net throughput
• VLAN transparent
• Latency < 3msec
To Next Page
Loading...
