Package Contents
WinLink User and Installation Guide Version 1.750 3-32
• For AC model, 110/240 VAC with IEC 60320 socket cable
• For DC model, 3-prong terminal block connector (green)
• 19” mounting kit
• Spare RJ-45 connector
PoE-8 Package Containing:
• PoE-8
• 110/240 VAC with IEC 60320 socket cable
• 3-prong terminal block connector (green)
• 19” mounting kit
• Spare RJ-45 connector
External antenna (if ordered)
• 1m RF cable
• Mounting kit
• ODU/IDU cable at length ordered (optional)
O-PoE package contains:
• O-PoE
• Mast/Wall mounting kit plus mounting instructions
• Spare RJ-45 connector
Additional Equipment Required
The following is a list of the equipment required for installing the
WinLink hardware.
• RJ-45 crimp tool (if pre-assembled ODU/IDU cable is not used)
• Drill (for wall mounting only)
• IDU and ODU 10AWG grounding cables
• O-PoE 10AWG grounding cable
• 13 mm (½″) spanner/wrench
• ODU to IDU cable if not ordered (outdoor class, CAT-5e, 4
twisted pairs 24AWG)
• ODU to O-PoE both cables (ETH and PoE) if not ordered
(outdoor class, CAT-5e, 4 twisted pairs 24AWG)
• Cable ties
• Laptop running Windows 2000 or Windows XP.
To Next Page
Loading...
