Installing the Link
WinLink User and Installation Guide Version 1.750 3-43
4. Click Next to proceed with the installation procedure.
The system dialog box opens:
Figure
3-10: Installation Wizard, System dialog box
5. Enter a SSID (System ID – must unique for each link in the area).
The SSID must include at least eight alphanumeric characters. Up
to 24 characters are allowed.
4.
Note:
Both sides of a link must have the same SSID number for data
transmission to take place.
6. Enter a Link Name for the link identification.
7. Enter a name for site 1 (the site to which your laptop is
connected).
8. Enter a name for site 2 (remote site).
To Next Page
Loading...
