Connecting the User Equipment
WinLink User and Installation Guide Version 1.750 3-46
Refer to Appendix A: Wiring Specifications, for the connector
pinout.
2. Connect user hub/router or any other compatible device to the IDU
panel RJ-45 port designated LAN. There may be multiple LAN ports
available for connecting to different LANs depending on the IDU
unit ordered.
Refer to Appendix A: Wiring Specifications for
the connector pinout.
Note:
Use a straight cable for router connection.
Do not connect two LAN ports to the same LAN, or flooding may occur.
To Next Page
Loading...
