Rasilient PixelStor 5000 - The CLI Commands

Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
7-98
dadate [Options]
Options:
?/-help: help information
-s [MMDDhhmmYY.ss]: set date and time specified
-z [GMT|gmt|UTC|utc] offset: set time zone by offset to GMT/UTC
Command Examples:
dadate: prints out the current date and time
dadate -s 1216183005.32: sets the date and time
dadate -z GMT: set as Greenwich Mean Time
dadate -z GMT +8: set as 8th zone east to GMT
dadate -z GMT -8: set as 8th zone west to GMT
Notes:
For offset value for your location, please check out the following sites
http://www.greenwichmeantime.com
http://www.worldtimezone.com
7.7.6 dadg
Use dadg to manage the Disk Groups.
dadg - manage disk groups.
Usage:
dadg [Options] [Parameter Options] [Device List]
Options:
-h: help
-help: help
-Ldisk: list disk information
-Ldg [disk-group name]: list disk-group information
-Lall: list generic information for all disk groups
-a [disk-group name]: create a disk group
-d [disk-group name]: delete a disk group
-D [disk-group name]: deactivate a disk group
-A [disk-group name]: activate a disk group
-s [disk-group name]: restore unhealthy disk group to degraded/healthy
-r: discover new disk groups