Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
Enter C0 NIC4 IP [ ]:
Enter C0 NIC5 IP [ ]:
Enter C1 NIC1 IP [ ]:
Enter C1 NIC2 IP [ ]:
Enter C1 NIC3 IP [ ]:
Enter C1 NIC4 IP [ ]:
Enter C1 NIC5 IP [ ]:
Enter default gateway IP [ ]:
Enter DNS address for system [ ]:
7.7.30 dashutdown
Use dashutdown to shutdown the local or remote controller.
dashutdown - shutdown local or remote controller.
usage:
dashutdown [Options] time
Options:
-help: help
-local: shutdown local controller. This is by default.
-remote: shutdown remote controller
The time argument is mandatory. It specifies the number of minutes
to wait before shutdown happens. "now" indicates immediate shutdown.
Command Examples:
dashutdown -help: display usage page
dashutdown now: shutdown the local controller now
dashutdown -remote 10: shutdown the remote one after 10 minutes
7.7.31 dasnmp
Use dasnmp list, add or delete SNMP managers
To Next Page
Loading...