Rasilient PixelStor 5000 - Dahostname; Dahwstat

Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
7-107
dahost -a -w iqn.test3 -o 0 -n test3 : add a host
dahost -d -w iqn.test3 : delete a host
dahost -d -n test3 : delete a host
dahost -a -w iqn.test2 -o 0 -n server2 -t "Server 2": add a host with comments
dahost -m -w iqn.test2 -n newhost : modify a hostname
dahost -m -w iqn.test2 -t \"\" : clear host comments
dahost -m -w iqn.test2 -s \"\" : clear target secret
7.7.14 dahostname
Use the dahostname to change the system name for the PixelStor 5000 . For those
systems that build an iSCSI target name with this name, you must use the –f (force) flag
to change the name because target names may be affected.
dahostname - display or set hostname for the storage array.
Usage:
dahostname [-h | -f] [hostname]
Options:
-h/help: display syntax
-f: force hostname change. This flag must be specified to
change host name for system supporting multiple
iSCSI targets.
Command Examples:
dahostname: Display current hostname
dahostname -f newhost: Change hostname to newhost
7.7.15 dahwstat
Use dahwstat to display the hardware status for the local controller.
dahwstat - show hardware status.
Usage:
dahwstat [Options]