Rasilient PixelStor 5000 - Dainspread

Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
7-108
Options:
-help: display help information
-drives | -drive: show properties of all the drives
-drive [no.]: show properties of a specified drive [0-23]
-chassis: show information of chassis components, including
controller ID, second controller installed,
Second controller presence, fan readings,
temperature readings, voltage readings and battery
information
-alert show alert messages if any
Command Examples:
dahwstat -alert
dahwstat -drive 0
dahwstat -drives
dahwstat –chassis
7.7.16 dainspread
Use dainspread to manage the Inspection Read operation.
dainspread - manage Inspection Read.
Usage:
dainspread [Options] [Option Parameters]
Options:
-h/-help: Show help information
-start: Immediately start Inspection Read
-stop: Immediately stop Inspection Read
-resume: Immediately start Inspection Read from last inspected block
-schedule: Add, delete or show Inspection Read schedule. When no parameters
are provided, -schedule shows the current schedule
-progress: Show the progress of Inspection Read
Option Parameters:
-repeat: Run continuously until dainspread is issued with the stop
option or the specified -duration is satisfied.
-cpu [priority]: Set the Inspection Read priority based upon cpu