Rasilient PixelStor 5000 - Dalun

Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
7-112
dakem -E -C 6000: Display all the KEM messages.
dakem -E -C 6000 -s warning: Display all the KEM message of severity
warning and above.
dakem -T warning Set alert level to warning.
7.7.19 dalun
Use dalun to manage the lun masking table. This pertains to Virtual Drive presentation.
dalun - manage the lun masking table.
Usage:
dalun [options] [fields...]
Options:
-h: help
-a: add a new lunmask entry
-d: delete a lunmask entry. You should log off at
the host initiator before performing a delete.
This ensures the host has sent all data to
the storage array.
-p: print out all the existing lunmask entries
Required fields:
-n [host]
-g [disk_group_name]
-k [virtual_disk_name]
-P [parent_virtual_disk_name]
Notes:
The -P parent_virtual_disk_name is only required if the
virtual disk presented is a snapshot virtual disk.
Command Examples:
dalun -a -n host1 -g dg1 -k vd1:
presents virtual disk vd1 in disk group dg1
to host1