Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
Usage:
dadsktst [Options]
Options:
-f [filename]: store test results in a file
-d [devices/all]: specify the hard drives to test, for example xda
or specify 'all' to test all available hard drives
-t [r/w/rw]: specify 'r', 'w' or 'rw' for read only, write only
or both tests write test can only be performed for
'spare' drives
-v: hide test information on console
-h: help information
Required options: -d, -t
Command Examples
dadsktst -d xda xdi xdg -t rw
dadsktst -d all -f results.dat -t w
Disk List Mapping:
/dev/xda: slot 0 (the top-left slot of RAID System
(main chassis))
/dev/xdb - /dev/xdk: slot 1 - slot 10 of RAID System (main chassis))
/dev/xdl: slot 11 (the bottom-right slot of RAID System
(main chassis))
/dev/xdaa - /dev/xdal: slot 0 - slot 11 of expansion enclosure 0
/dev/xdba - /dev/xdbl: slot 0 - slot 11 of expansion enclosure 1
/dev/xdca - /dev/xdcl: slot 0 - slot 11 of expansion enclosure 2
7.7.10 dafwdwnld
Use dafwdwnld to download the f/w into the Expanders (PixelStore 100e). This
command downloads the f/w automatically into both controllers and all the Expanders.
dafwdwnld - download target system's main chassis and expander firmware
Usage:
dafwdwnld [Options]
Options:
To Next Page
Loading...