Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
7.7.8 dadiskload
Use dadiskload to download the f/w for Seagate drives.
dadiskload - download firmware for Seagate SATA hard drive
Usage:
dadiskload [Options]
Options:
-n [URL or file]: URL or file name for the firmware, the firmware file
must be in the format: drivemodel_firmwarerevision
-d [devices/all]: specify the hard drives for download, for example
/dev/xd[a-h] or specify 'all' to download for all
available hard drives
-i: display drive information
-s: only display Seagate drive information (-i required)
-h: display this help information
-u: skip firmware version check for download(in downgrade)
-q: hide download progress information on console
Required options: -d, -n
Command Examples
dadiskload -d /dev/xda /dev/xdi /dev/xdd[a-h] -n joe:passwd@192.168.1.1/
images/ST3400633AS_3.AAD
dadiskload -d /dev/xda /dev/xdi /dev/xdd[a-h] -n joe:passwd@192.168.1.1/
images/ST3400633AS_0.AAD -u
dadiskload -d all -n joe:passwd@192.168.1.1/images/ST3750640NS_3.AEK
dadiskload -i
dadiskload -i –s
7.7.9 dadsktst
Use dadsktst to measure the baseline data transfer performance for disk drives.
dadsktst - measure hard drive baseline performance
To Next Page
Loading...