Rasilient PixelStor 5000 - Figure 4-19 Disk Group Properties; Figure 4-20 RAID Build Progress

Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
4-36
Figure 4-19 Disk Group Properties
A RAID build is automatically started on the Disk Group when it is created according to the
RAID level specified. The RAID is Building button is highlighted while the RAID is building. You
can use the Disk Group while the RAID is building. You may also click on the RAID is Building
button to open the RAID Build Progress page shown in Figure 4-20.
Figure 4-20 RAID Build Progress