Hardware Installation
PixelStor 5000 User Manual
Rev. 1, May 2013
Usage:
dahelp [Options]
Options:
-h/help: display this help page
[command]: display usage for the specified command
-s [pattern]: display usage for all the commands that match the pattern
Command List:
daacl - manage access control list
daaddrbk - add email address to notification list
dacomment - add comments to configuration
daconnstat - display connection statistics
dadate - display or set the date and time
dadg - manage disk groups
dadiskcache - Turn on/off disk write caches for all drives
dadiskload - download firmware for Seagate hard drives
dadsktst - measure disk baseline IO performance
dafwdwnld - download expander firmware
dahelp - display help information about commands
dahost - define or manage host
dahostname - display or set hostname for the storage array
dahwstat - display hardware status
dainspread - manage Inspection Read
daisns - manage iSNS client
dakem - display event log
dalun - manage the lun masking table
dantpdate - configure NTP server
dapasswd - set the password for the user
daphyinfo - get expander phy status information
dapm - configure the drive power management
dareboot - reboot local or remote controller
daroute - display or set gateway address
dasavelog - save the complete log file from the target to the local PC.
daselblk - select a chassis or a hard drive to blink
dasetup - set IP addresses, netmask, gateway and name server
dashutdown - shutdown local or remote controller
dasmartinfo - used to view disk smart information
dasnmp - Add/Delete SNMP managers to send traps to
dastat - display the system information
To Next Page
Loading...