About This Manual
PixelStor 5000 User Manual
Rev. 1, May 2013
本儲存裝置提供內建鋰離子電池或電池套件。若未正確更換或不當處理電池，則可能
有爆炸的危險及產生人身傷害的風險。
For more information about battery replacement or proper disposal, contact an
authorized reseller or your authorized service provider.
若想瞭解更多有關更換或適當處置電池的資訊，請聯絡授權經銷商或授權之服務供應
商。
Rack Warnings
If you plan to rack mount the PixelStor 5000, follow the rack manufacturer’s safety instructions.
Install the enclosure only in a rack that has been properly secured in an area with suitable
environmental conditions.
Have someone assist you during physical installation.
To properly ventilate the system, you must provide at least 7.6 cm of clearance at the front
and back of the system.
To reduce the risk of personal injury or damage to equipment, always ensure that the rack is
adequately stabilized prior to extending a component outside the rack. A rack may become
unstable if more than one component is extended. Extend only one at a time.
Do not stand or step on any components in the rack.
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the
rack environment may be greater than room ambient. Therefore, consideration should be
given to installing the equipment in an environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
Do not overload the AC power supply branch circuit that provides power to the rack.
Observe extension cable and power strip ratings. Ensure that the total ampere rating of all
equipment plugged into the extension cable or power strip does not exceed 80 percent of
the ampere ratings limit for the extension cable or power strip.
System Warnings
Avoid dust, humidity, and extreme temperatures; place the system on a stable surface.
To reduce the risk of personal injury from hot surfaces, allow the hot-plug disk modules and
other system modules to cool before touching them.
To reduce the risk of electric shock or damage to the equipment, do not disable the power
cord grounding plug. The grounding plug is an important safety feature.
Ensure the power cord is inserted into a grounded electrical outlet that is easily accessible
To Next Page
Loading...