Rational iCombi Pro - Program View; Light; Display Brightness

14 | Settings
104 / 188 Original instructions for use
14.2.4 Program view
Here, you can set whether intelligent cooking paths in the iCookingSuite and in
the programming mode should be displayed in a single-column, dual-column or
triple-column format.
1. Press this button: Program view
2. Select Single-column, Two-column, or Three-column.
>> The selection will be applied automatically.
14.3 Light
1. Press this button:
2. Press this button: Light
14.3.1 Display brightness
Here, you can adjust the display brightness on a scale of 0-100%.
1. Press this button: Display brightness
2. Select the desired value on the scale or set it using the dial.
>> The display brightness is adjusted automatically.
Automatic dimming
1. Press this button: Automatic dimming
>> You can now switch the automatic dimming on or off.
Dimming after x min
1. Press this button: Dimming after x min