Rational iCombi Pro - Add Profile; Edit Display

14 | Settings
128 / 188 Original instructions for use
14.11.
3
Add profile
Here you can add a new profile.
1. Press this button: Add profile
>> You can now add a new profile.
1. Press this button: from an existing profile to create a profile based on an
existing one. You can now change settings for the newly added profile under
the Edit profile [}125] menu item.
2. Press this button: from a profile template to create a new profile using a
profile template.
14.11.
4
Edit display
a You have created a new display.
1. Press this button: Edit display
> The functions and intelligent assistants on the menu bar will be displayed.
2. Press the desired button.
> All available functions will be displayed.
n
Within the Manual Cooking section, you have access to the Steam,
Combination and Hot Air cooking modes.
n
You can access all intelligent cooking paths within the iCookingSuite
section.
n
All manual and intelligent programs as well as shopping carts are available to
you within the Programming Mode section. If you have not yet saved any
programs or shopping carts, this section will be empty.
n
Within the iCareSystem section, you have access to all Cleaning modes
[}148] and Cleaning programs [}148].
1. Tap each function you would like to assign to the display menu.
> The function will be marked with .
2. To check the list of functions on the display menu, press this button:
3. To remove a function from the display menu, press this button:
4. To give the display menu a name, press this button:
5. Enter a name.
6. To save the display menu, press this button:
>> You will be returned to the overview screen.
1. To assign the display menu to a profile, press this button: Edit profile