Rational iCombi Pro - Connecting the Network Cable; Establish Network Connection

15 | Kitchen management
Original instructions for use 135 / 188
Optimized network settings allow you to connect to wireless networks with
hidden SSIDs:
n
Press this button: Manual WiFi connection.
n
You can now enter the network name (SSID) and the associated password.
n
Press this button: to connect.
15.2.2 Connecting the network cable
Your unit is equipped with a network connection as standard. To connect your
unit with the network and to ensure that your unit is protected from water jets
from all directions, use a network cable with the following properties:
n
Network cable category 6
n
Maximum plug length of 45mm
n
Plug diameter of 18.5mm
n
Cable diameter of 5.5–7.5mm
CAUTION
The function parts around the network connection can reach temperatures of
over 140°F
You may burn yourself when connecting a network cable to a unit that is
currently in use or that was recently in use.
1. Allow the unit to cool down before connecting the network cable.
1. Unscrew the protective cover.
2. Feed the individual parts of the protective cover onto the network cable.
3. Connect the network cable to the network connection.
4. Screw on the protective cover.
15.2.3 Establish network connection
a Make sure you have all network connection data on hand.