Rational iCombi Pro - Removing Hinging Racks; Integrated Fat Drain

4 | Working with the unit
Original instructions for use 33 / 188
4.10 Removing hinging racks
1. Grasp the hinging rack in the middle of the upper level.
2. Press the hinging rack upwards (A).
3. Tilt the left hinging rack in the cooking cabinet (B).
4. Unhook the hinging rack and remove it from the cooking cabinet.
4.11 Integrated fat drain
If your unit is equipped with an optional integrated fat drain, the dripping fast is
collected in the cooking cabinet and fed into the grease drip container.
1 Ball valve handle 2 Drain pipe
3 Filler neck with bayonet lock 4 Grease drip container
1. Open the cooking cabinet door.
2. Remove the lock of the drain pipe.