11 | Programming mode
Original instructions for use 91 / 188
11.2 Creating an intelligent program
On intelligent cooking paths, you can only adjust the cooking parameters - it is
not possible to re-sequence the individual cooking steps.
1. In the menu bar, press this button:
2. Press this button: + New element
3. Press this button:
> The system will ask you what you would like to program.
4. Select one of the following options:
n
operating mode
n
Operating mode and cooking method
n
Cooking method
After making your selection, any matching intelligent cooking paths will be
shown on the display.
1. Select an intelligent cooking path.
> The individual cooking steps will be displayed. Now you are ready to adjust
the cooking parameters to fit your needs.
To Next Page
Loading...
