15 | Kitchen management
138 / 188 Original instructions for use
1. Scan the QR code.
>> After a few moments, the cooking system will indicate that a connection has
been established to the ConnectedCooking server. This symbol will appear in
the footer:
>> The cooking system will appear on the ConnectedCooking cooking systems
overview screen.
>> You will receive an email confirming that the cooking system has been
registered successfully.
15.4 Run software update
Automatic software updates via ConnectedCooking
a Start by connecting your unit to ConnectedCooking.
1. Press this button:
2. Press this button: ConnectedCooking
3. To activate the Download software updates automatically function, press
the button: ON
4. Press this button:
5. Press this button: Service
6. Press this button: Software update info
7. Press this button: Start installation
>> The software update is carried out and the unit is rebooted.
Software update via USB stick
a You have connected a USB stick containing a software update to the unit.
a A message appears informing you that a software update has been detected.
1. Confirm the message that a software update should be carried out.
>> The software update is carried out and the unit is rebooted.
To Next Page
Loading...
