4 | Working with the unit
Original instructions for use 31 / 188
Core temperature probe not detected
a The display will show this symbol:
1. Place the core temperature probe as described in these instructions for use.
2. Confirm the correction.
>> The cooking path will be implemented correctly. If you do not confirm the
correction, the cooking path will be canceled and you will need to restart it. A
few cooking paths, such as low-temperature cooking, will continue running
despite the error.
Removing the core temperature probe
1. Once the food has reached your desired degree of doneness, remove the
core temperature probe from the food, and then remove the food from the
cooking cabinet.
2. Once you have cleaned the core temperature probe, insert it into the holder
provided and then remove the food from the cooking cabinet.
4.9 Using the hand shower
Please note that you have the option of ordering a cooking system without a
hand shower.
The hand shower has two spray modes: spray (A) and jet (B).
CAUTION
The hand shower water and the hand shower itself may reach temperatures
exceeding 140°F.
Grasping heated parts or coming into contact with hot water may cause
scalding injuries.
1. Always wear gloves when working with the hand shower.
To Next Page
Loading...
