Rational iCombi Pro - Replacing the Cooking Cabinet Door Seal

10 | iProductionManager
Original instructions for use 75 / 188
1. In the menu bar, press this button:
2. Press this button:
3. Press this button:
4. Select the operating mode: Steam [}65] , Combi-Steam [}66] or
Convection [}68] .
5. Adjust the cooking parameters as desired. You can also set the speed of the
fan wheel. To do so, press this button:
6. To save your changes, press this button:
7. To increase or decrease the core temperature or the cooking time, either turn
the central dial or press the buttons: or
8. Press the button until the desired setting is achieved.
>> You can now place the tickets [}78].
10.2 Ticket board
You can add any intelligent cooking paths, programs, or shopping carts to the
ticket board. Unless the ticket board is saved as a shopping cart [}93], it will be
overwritten the next time you load a new shopping cart.
10.2.1 Adding intelligent cooking paths
1. To send an intelligent cooking path from the iCookingSuite to the
iProductionManager, press this button in the menu bar:
2. Press this button beside your chosen cooking path: