Rational iCombi Pro - Cooking System; Information on the Unit Type; Power Usage; Iproductionmanager Energy-Saving Mode

14 | Settings
108 / 188 Original instructions for use
14.5 Cooking system
1. Press this button:
2. Press this button: Cooking system
14.5.1 Information on the unit type
Here, you can see the model of your unit and the software version installed.
14.5.2 Power usage
You can call up the Energy Dashboard via this menu item. From there, you can
monitor your cooking system's energy consumption. Energy consumption is
calculated in detail based on the chosen settings; it can also be displayed and
evaluated in ConnectedCooking.
Press this button: to check the energy consumption of your cooking system.
The energy consumption display allows you to view the energy consumption of
the most recently completed cooking process. The following consumption data is
provided after completion of a manual or intelligent cooking process, use of
iProductionManager, or cleaning:
n
Cooking process duration
n
Type of cooking process
n
Energy consumption in kWh
NOTE
Energy consumption information is only available after the cooking process
has been completed; it is overwritten when a new cooking process is started.
The energy values shown are calculated rather than measured. Measuring
instruments may indicate slightly different values to the ones displayed.
14.5.3 iProductionManager energy-saving mode
Press this button: to switch the IPM energy saving mode on or off.
14.5.4 Screen lock
Here, you can switch the screen lock on and off.
n
To activate the function, press this button: ON
n
To deactivate the function, press this button: OFF